Dynamic Mechanical Analyzer DMA/SDTA 1+
Contact Info
- Add:廣州市天河區(qū)廣汕二路13號-327-1房, Zip: 510630
- Contact: 譚真東
- Tel:020-87031216
- Email:13808866455@139.com
Other Products
Guangzhou Jincheng Scientific Instruments Co., Ltd. supplies the Mettler Toledo Dynamic Mechanical Analyzer DMA/SDTA 1+, with a force range from 1 mN to 40 N, capable of measuring very hard and very soft samples. The patented SDTA? technology allows users to calibrate sample temperature and accurately measure thermal effects. The Dynamic Mechanical Analyzer DMA/SDTA 1+ is the choice for characterizing composite materials with a wide modulus range.
The frequency range can reach up to 1000 Hz, simulating material behavior and accurately determining modulus through a dedicated force sensor.
When sample testing requires high accuracy over a wide stiffness or frequency range, the DMA/SDTA 1+ is the ideal solution.
Dynamic Mechanical Analysis (DMA) is used to determine the relationship between a material's mechanical and viscoelastic properties as they change with temperature, time, and frequency under periodic oscillatory force.
Dynamic Mechanical Analyzer DMA/SDTA 1+ Features:
? Simultaneous measurement of displacement and force — provides highly accurate modulus determination
? Wide force range from 1 mN to 40 N — capable of measuring very hard and very soft samples
? Broad frequency range — 0.001 Hz to 1000 Hz, allowing measurements to simulate real-world conditions or be performed more quickly at higher frequencies
? DMA experiment wizard — setting up an experiment yields better results
? Patented SDTA? technology — enables users to calibrate sample temperature and precisely measure thermal effects
? Wide stiffness range — allows measurements across the entire temperature range with a single sample holder
? Ergonomic design and touchscreen control — enables faster experiment setup and optimization
Dynamic Mechanical Analyzer DMA/SDTA 1+ Technical Parameters:
Temperature | |
Range | -150 to 500°C |
Resolution | 0.003 K |
Accuracy | 0.5 K |
Force | |
Range | 0.001 to 40 N |
Resolution | 0.15 mN (0 to 5 N), 1.5 mN (5 to 50 N) |
Sensitivity | 1 mN |
Displacement | |
Range | ± 1.6 mm |
Resolution | 0.6 nm |
Sensitivity | 5 nm |
Stiffness | |
Range | 10 to 10^8 N/m |
Accuracy | 0.2% |
Loss Factor (tanδ) | |
Range | 0.0001 to 5000 |
Resolution | 0.00001 |
Sensitivity | 0.0001 |
Frequency | |
Range | 0.001 to 1000 Hz (*) |
Resolution | 0.00001 |
Frequency Increment (?f) | 0.0001 |
Frequency Mode | ? Linear and logarithmic scanning ? Frequency series ? Multi-frequency |
Deformation Mode | |
3-Point Bending Dual Cantilever Single Cantilever | Length: 30 to 90 mm, Length: 20 to 80 mm Width: < 15 mm, Thickness: < 5 mm Maximum sample length: 100 mm |
Bending Mode Stiffness Range | 1 to 10^6 N/m |
Shear | Diameter: ≤ 15 mm, Thickness: ≤ 6.5 mm |
Shear Mode Stiffness Range | 1 to 10^8 N/m |
Tensile | Length: 19.5 mm, 10.5 mm, 9.0 mm, 5.5 mm Width: ≤ 7 mm, Thickness: ≤ 3 mm |
Tensile Mode Stiffness Range | 1 to 10^7 N/m |
Compression | Diameter: ≤ 19 mm, Thickness: ≤ 9 mm |
Compression Mode Stiffness Range | 1 to 10^7 N/m |
Certification | |
IEC/EN 61010-1, IEC/EN 61010-2-010, and IEC/EN 61010-2-081 CAN/CSA C22.2 No. 61010-1, No. 61010-2-010, and No. 61010-2-081 | |
Information about the Mettler Toledo Dynamic Mechanical Analyzer DMA/SDTA 1+ is provided by Guangzhou Jincheng Scientific Instruments Co., Ltd. For more details about the dynamic mechanical analyzer, please feel free to contact us.
| Industry Category | |
|---|---|
| Product Category | |
| Brand: | 梅特勒托利多 |
| Spec: | DMA/SDTA 1+ |
| Stock: | 300 |
| Manufacturer: | |
| Origin: | China / Guangdong / Guangzhoushi |
